Alcatel-Lucent 7750 SR - Page 1320

VPRN Service Configuration Commands
Page 1320 7750 SR OS Services Guide
sub-profile
Syntax sub-profile sub-profile-name
no sub-profile
Context config>service>vprn>if>sap>static-host
config>service>vprn>sub-if>grp-if>sap>static-host
Description This command specifies an existing subscriber profile name to be associated with the static subscriber
host.
Parameters sub-profile-name — Specifies the sub-profile name.
subscriber
Syntax subscriber sub-ident
no subscriber
Context config>service>vprn>if>sap>static-host
config>service>vprn>sub-if>grp-if>sap>static-host
Description This command specifies an existing subscriber identification profile to be associated with the static
subscriber host.
Parameters sub-ident — Specifies the subscriber identification/
subscriber-sap-id
Syntax [no] subscriber-sap-id
Context config>service>vprn>if>sap>static-host
config>service>vprn>sub-if>grp-if>sap>static-host
Description This command enables using the SAP ID as subscriber id.
Parameters subscriber-sap-id — Specifies to use the sap-id as the subscriber-id.
queue-override
Syntax [no] queue-override
Context config>service>vprn>if>sap>egress
config>service>vprn>if>sap>ingress
config>service>vprn>ipsec-if>sap>egress
config>service>vprn>ipsec-if>sap>ingress
Description This command enables the context to configure override values for the specified SAP egress or
ingress QoS queue. These values override the corresponding ones specified in the associated SAP
egress or ingress QoS policy.