VPRN Service Configuration Commands
Page 1346 7750 SR OS Services Guide
init-delay
Syntax init-delay seconds
no init-delay
Context config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
Description This command configures a VRRP initialization delay timer.
Default no init-delay
Parameters seconds — Specifies the initialization delay timer for VRRP, in seconds.
Values 1 — 65535
mac
Syntax [no] mac ieee-mac-address
Context config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
Description This command assigns a specific MAC address to an IP interface.
The no form of this command returns the MAC address of the IP interface to the default value.
Default The physical MAC address associated with the Ethernet interface that the SAP is configured on.
Parameters ieee-mac-address — Specifies the 48-bit MAC address for the static ARP in the form
aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
master-int-inherit
Syntax [no] master-int-inherit
Context config>service>vprn>if>vrrp
config>service>vprn>if>ipv6>vrrp
Description This command allows the master instance to dictate the master down timer (non-owner context only).
Default no master-int-inherit