Subscriber Services
7750 SR OS Services Guide Page 135
phone
Syntax [no] phone string
Context config>service>customer customer-id
Description This command adds telephone number information for a customer ID.
Default none
The no form of this command removes the phone number value from the customer ID.
Parameters string — The customer phone number entered as an ASCII string string up to 80 characters. If the
string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within
double quotes. Any printable, seven bit ASCII characters may be used within the string.
mrp
Syntax mrp
Context config>service
Description This command configures an MRP.
mrp-policy
Syntax [no] mrp-policy policy-name
Context config>service>mrp
Description This command enables the context for a MRP policy. The mrp-policy specifies either a forward or a
drop action for the Group BMAC attributes associated with the ISIDs specified in the match criteria.
The mrp-policy can be applied to multiple BVPLS services as long as the scope of the policy is
template.
Any changes made to the existing policy, using any of the sub-commands, will be applied
immediately to all services where this policy is applied. For this reason, when many changes are
required on a mrp-policy, it is recommended that the policy be copied to a work area. That work-in-
progress policy can be modified until complete and then written over the original mrp-policy. Use the
config mrp-policy copy command to maintain policies in this manner.
The no form of the command deletes the mrp-policy. A mrp policy cannot be deleted until it is
removed from all the SAPs or SDPs where it is applied.
Default no mrp-policy is defined
Parameters policy-name — Specifies the redirect policy name. Allowed values are any string up to 32 characters
long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
create — 1.Keyword; required when first creating the cofiguration context. Once the context is cre-
ated, it is possible to navigate into the context without the create keyword.
To Next Page
Loading...
