Subscriber Services
7750 SR OS Services Guide Page 137
considered complete. Entries without the action keyword will be considered incomplete and hence
will be rendered inactive.
The no form of the command removes the specified entry from the mrp-policy. Entries removed from
the mrp-policy are immediately removed from all services where the policy is applied.
The no form of the command removes the specified entry-id.
Default none
Parameters entry-id — An entry-id uniquely identifies a match criteria and the corresponding action. It is
recommended that multiple entries be given entry-ids in staggered increments. This allows users
to insert a new entry in an existing policy without requiring renumbering of all the existing
entries.
Values 1-65535
create — Keyword; required when first creating the configuration context. Once the context is
created, one can navigate into the context without the create keyword.
match
Syntax [no] match
Context config>service>mrp>mrp-policy>entry
Description This command creates the context for entering/editing match criteria for the mrp-policy entry. When
the match criteria have been satisfied the action associated with the match criteria is executed. In the
current implementation just one match criteria (ISID based) is possible in the entry associated with
the mrp-policy. Only one match statement can be entered per entry.
The no form of the command removes the match criteria for the entry-id.
isid
Syntax [no] isid value | from value to higher-value
Context config>service>mrp>mrp-policy>entry>match
Description This command configures an ISID value or a range of ISID values to be matched by the mrp-policy
parent when looking at the related MMRP attributes (Group BMACs). The pbb-etype value for the
related SAP (inherited from the ethernet port configuration) or for the related SDP binding (inherited
from SDP configuration) will be used to identify the ISID tag.
Multiple isid statements are allowed under a match node. The following rules govern the usage of
multiple isid statements:
• overlapping values are allowed:
isid from 1 to 10
isid from 5 to 15
isid 16
To Next Page
Loading...
