VSM Path Commands
Page 1480 7750 SR OS Services Guide
net-sap
Syntax net-sap
Context config>vsm>ccag ccag-id>path {a | b}>net-sap
Description This command changes the current CLI context to the path net-sap nodal context. The net-sap nodal
context contains the network accounting and queue policies and the egress buffer pool configuration
commands. The net-sap path context is associated with all network IP interfaces bound to the CCAG
path (alpha or beta depending on the path context) that cross connects to a SAP on the other path.
The CCA path net-sap nodal context always exists and cannot be removed.
mtu
Syntax mtu mtu-size
no mtu
Context config>vsm>ccag ccag-id>path {a | b}>
Description This command overrides the default port level MTU for the path’s net-sap context.
The no form of the command returns the MTU for the path’s net-sap context to the default MTU.
Parameters mtu-size — The mtu-size, in bytes, defines the Ethernet MTU that is to be associated with the path’s
net-sap context.
Default 1522
accounting-policy
Syntax accounting-policy accounting-policy
no accounting-policy
Context config>vsm>ccag ccag-id>path {a | b}>net-sap
Description This command defines the network accounting policy that will be used to define which statistics will
be collected when the collect-stats command is enabled in the path’s net-sap context.
The no form of the command reverts the path’s net-sap context statistics billing collection to the
statistics defined in the default network accounting policy.
Parameters accounting-policy — The accounting-policy parameter is required and identifies which set of
statistics will be collected for billing output.
Values Any existing network accounting policy in the system.
Default The default network accounting policy
To Next Page
Loading...
