Show, Clear, Debug Commands
Page 1498 7750 SR OS Services Guide
No. of Entries: 2
===============================================================================
*A:ALA-48#
*A:ALA-48# show service fdb-mac expiry
===============================================================================
Service Forwarding Database
===============================================================================
ServId MAC Source-Identifier Type/ Last Change
Expiry
-------------------------------------------------------------------------------
103 12:34:56:78:90:0f sap:1/1/7:0 Static 02/02/2009 09:27:57
700 90:30:ff:ff:ff:8f cpm Host 02/02/2009 09:27:57
-------------------------------------------------------------------------------
No. of Entries: 2
===============================================================================
*A:ALA-48#
isid-using
Syntax isid-using [ISID]
Context show>service
Description This command displays services using ISID.
Parameters ISID — Displays the service using the specified I-component Service ID (ISID).
Values 0 — 16777215
Output
*A:SetupCLI# show service isid-using
=================================================================
Services
=================================================================
SvcId ISID Type b-Vpls Adm Opr SvcMtu CustId
-----------------------------------------------------------------
2001 122 i-VPLS 2002 Up Down 1514 1
2005 2005 i-mVP* 2004 Down Down 1500 1
-----------------------------------------------------------------
Matching Services : 2
-----------------------------------------------------------------
*A:SetupCLI#
l2-route-table
Syntax l2-route-table [detail] [bgp-ad] [multi-homing] [bg-vpls]
Context show>service
Description This command displays L2 route table information.
detail — Displays detailed information.