Alcatel-Lucent 7750 SR - Page 1510

Show, Clear, Debug Commands
Page 1510 7750 SR OS Services Guide
service-using
Syntax service-using [epipe] [ies] [vpls] [vprn] [mirror] [b-vpls] [i-vpls] [m-vpls] [apipe] [fpipe] [ipipe]
[sdp sdp-id] [customer customer-id]
Context show>service
Description This command displays the services matching certain usage properties. If no optional parameters are
specified, all services defined on the system are displayed.
Parameters epipe — Displays matching Epipe services.
ies — Displays matching IES instances.
vpls — Displays matching VPLS instances.
i-vpls — Displays matching I-VPLS instances.
b-vpls — Displays matching B-VPLS instances.
m-vpls — Displays matching M-VPLS instances.
vprn — Displays matching VPRN services.
mirror — Displays matching mirror services.
apipe — Displays matching Apipe services.
fpipe — Displays matching Fpipe services.
ipipe — Displays matching Ipipe services.
sdp sdp-id — Displays only services bound to the specified SDP ID.
Default Services bound to any SDP ID.
Values 1 — 17407
customer customer-id — Displays services only associated with the specified customer ID.
Default Services associated with a customer.
Values 1 — 2147483647
Output Show Service Service-Using — The following table describes show service service-using output
fields.
Label Description
Service Id
The service identifier.
Type
Specifies the service type configured for the service ID.
Adm
The desired state of the service.
Opr
The operating state of the service.
CustomerID
The ID of the customer who owns this service.