Service Commands
7750 SR OS Services Guide Page 1513
Show Commands
eth-cfm
Syntax eth-cfm
Context show
Description This command enables the context to display eth-cfm information.
eth-tunnel
Syntax eth-tunnel {aps|status}
eth-tunnel tunnel-index [path path-index] [detail]
Context show
Description This command displays ethernet tunnel information. Any data SAP missing a tag for a defined path
has the EthTunTagMismatch flag generated. In the example provided below, SAP eth-tunnel-1:1
does not have the tag for path 2 configured. Therefore, it is operationally down with the reason
indicated by the EthTunTagMismatch flag.
Parameters tunnel-index — Specifies the tunnel index.
Values 1..1024
path-index — Specifies the path index.
Values 1..16
detail — Keyword; displays detailed information
status — Keyword; displays ethernet tunnel status information.
aps — Keyword; displays APS ethernet tunnel information.
Sample Output
*A:Dut-C>show>service>id# show eth-tunnel status
=============================================================================
Ethernet Tunnel Groups (Status information)
=============================================================================
Tunnel Admin Oper Member Information MEP Information
ID State State Path Tag State Ctrl-MEP CC-Intvl Defects
-----------------------------------------------------------------------------
1 Up Up 1 - 1/1/2 4030 Up Yes 1 -----
2 - 3/1/3 4031 Up Yes 1 -----
2 Up Up 1 - 3/1/1 100 Up Yes 1 -----
2 - 3/1/3 4032 Up Yes 1 -----
65 Up Up 3 - 2/1/4 65.4003 Up - - -----
8 - 1/1/3 65.4008 Up - - -----
To Next Page
Loading...
