Show, Clear, Debug Commands
Page 1538 7750 SR OS Services Guide
id
Syntax id service-id {all | arp | base | endpoint | fdb | interface | labels | sap | sdp | split-horizon-
group | stp}
Context show>service
Description This command displays information for a particular service-id.
Parameters service-id — The service identification number that identifies the service in the domain.
Values service-id: 1 — 214748364
svc-name: A string up to 64 characters in length.
all — Display detailed information about the service.
arp — Display ARP entries for the service.
base — Display basic service information.
endpoint — Display service endpoint information.
interface — Display service interfaces.
labels — Display labels being used by this service.
sap — Display SAPs associated to the service.
sdp — Display SDPs associated with the service.
split-horizon-group — Display split horizon group information.
stp — Display STP information.
authentication
Syntax authentication
Context show>service>id
Description This command enables the context to display subscriber authentication information.
statistics
Syntax statistics [policy name] [sap sap-id]
Context show>service>id>authentication
Description This command displays session authentication statistics for this service.
Parameters policy name — Specifies the subscriber authentication policy statistics to display.
sap sap-id — Specifies the SAP ID statistics to display. See Common CLI Command Descriptions on
page 1933 for command syntax.
To Next Page
Loading...
