VPLS Show Commands
7750 SR OS Services Guide Page 1597
id
Syntax id service-id
Context show>service
Description This command displays information for a particular service-id.
Parameters service-id — The unique service identification number that identifies the service in the service
domain.
Values service-id: 1 — 214748364
svc-name: A string up to 64 characters in length.
all — Display detailed information about the service.
arp — Display ARP entries for the service.
authentication — Display subscriber authentication information
base — Display basic service information.
dhcp — Display DHCP information.
endpoint — Display service endpoint information.
epipe — Display e-pipe services associated with the b-vpls service.
fdb — Display FDB entries.
gsmp — Display GSMP information.
host — Display static hosts configured on the service.
i-vpls — Display i-vpls services associated with the b-vpls.
igmp-snooping — Display IGMP snooping information.
interface — Display service interfaces.
l2-route-table — Display Layer-2 route information associated with the service.
l2pt — Display L2PT information of SAPs and Spokes.
labels — Display labels being used by this service.
mac-move — Display Mac Move related information about the service.
mac-protect — Display MAC protect information.
mfib — Display MFIB related information.
mld-snooping — Display MLD snooping information.
mmrp — Display MMRP information.
mrp — Display MRP information
msap — Display MSAPs associated to the service.
pim-snooping — Display PIM snooping information.
pppoe — Display PPPoE information.
retailers — Display service retailer information.