VPLS Show Commands
7750 SR OS Services Guide Page 1599
all
Syntax all
Context show>service>id
Description This command displays detailed information for all aspects of the service.
Output Show service ID all output — The following table describes the command output fields.
Label Description
Service Id
The service identifier.
VPN Id
The number which identifies the VPN.
Service Type
Specifies the type of service.
SDP Id
The SDP identifier.
Description
Generic information about the service.
Customer Id
The customer identifier.
Last Mgmt Change
The date and time of the most recent management-initiated change to
this customer.
SAP Count
The number of SAPs specified for this service.
SDP Bind Count
The number of SDPs bound to this service.
Split Horizon
Group
Name of the split horizon group for this service.
Description
Description of the split horizon group.
Last Changed
The date and time of the most recent management-initiated change to
this split horizon group.
SDP Id
The SDP identifier.
Type
Indicates whether this service SDP binding is a spoke or a mesh.
Admin Path MTU
The desired largest service frame size (in octets) that can be transmit-
ted through this SDP to the far-end router, without requiring the packet
to be fragmented.
Oper Path MTU
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to
be fragmented.
Delivery
Specifies the type of delivery used by the SDP: GRE or MPLS.
Admin State
The administrative state of this SDP.
Oper State
The operational state of this SDP.
To Next Page
Loading...
