Show, Clear, Debug Commands
Page 1630 7750 SR OS Services Guide
Mac Move Timeout
Displays the time in seconds to wait before a SAP that has
been disabled after exceeding the maximum re-learn rate is
re-enabled.
A value of zero indicates that the SAP will not be automati-
cally re-enabled after being disabled. If after the SAP is re-
enabled it is disabled again, the effective retry timeout is
doubled in order to avoid thrashing.
Mac Move Retries
Displays the number of times retries are performed for reen-
abling the SAP/SDP.
Table Size
Specifies the maximum number of learned and static entries
allowed in the FDB of this service.
The maximum value is 511999 when the the value of the
chassis mode is d.
The maximum value is 196607 when the chassis mode is c.
In other cases, the maximum value is 131071.
Total Count
Displays the total number of learned entries in the FDB of
this service.
Learned Count
Displays the current number of learned entries in the FDB
of this service.
Static Count
Displays the current number of static entries in the FDB of
this service.
OAM-learned Count
Displays the current number of OAM entries in the FDB of
this service.
DHCP-learned Count
Displays the current number of DHCP-learned entries in the
FDB of this service.
Host-learned Count
Displays the current number of host-learned entries in the
FDB of this service.
Remote Age
Displays the number of seconds used to age out FDB entries
learned on an SDP. These entries correspond to MAC
addresses learned on remote SAPs.
Local Age
Displays the number of seconds used to age out FDB entries
learned on local SAPs.
High Watermark
Displays the utilization of the FDB table of this service at
which a table full alarm will be raised by the agent.
Low Watermark
Displays the utilization of the FDB table of this service at
which a table full alarm will be cleared by the agent.
Mac Learning
Specifies whether the MAC learning process is enabled
Discard Unknown
Specifies whether frames received with an unknown desti-
nation MAC are discarded.
Mac Aging
Indicates whether the MAC aging process is enabled.
Label Description
To Next Page
Loading...
