Alcatel-Lucent 7750 SR - Page 1638

Show, Clear, Debug Commands
Page 1638 7750 SR OS Services Guide
host
Syntax host [sap sap-id] [detail]
host summary
Context show>service>id
Description This command displays static host information configured on this service.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 1933 for command syntax.
summary — Displays summary host information.
host-connectivity-verify
Syntax host-connectivity-verify statistics [sap sap-id]
Context show>service>id
Description Displays host connectivity check statistics.
Parameters statistics — Displays host connectivity verification data.
sap sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 1933 for command syntax.
Output Show Service Id Host Connectivity Verify — The following table describes show service-id
host connectivity verification output fields:
Sample Output
A:ALA-48>show>service>id# host-connectivity-verify statistics sap 1/1/9:0
==============================================================================
Host connectivity check statistics
==============================================================================
Svc SapId/ DestIp Last Time Oper
Id SdpId Address Response Expired State
------------------------------------------------------------------------------
Label Description
Svc Id
The service identifier.
SapId/SdpId
The SAP and SDP identifiers.
DestIp Address
The destination IP address.
Last Response
The time when the last response was received.
Time Expired
Displays whether the interval value has expired.
Oper State
Displays the current operational state of the service.