Show, Clear, Debug Commands
Page 1640 7750 SR OS Services Guide
-----------------------------------------------------------------
Matching Services : 2
-=================================================================
*A:SetupCLI#
A:term17# show service isid-using
=================================================================
Services
=================================================================
SvcId ISID Type b-Vpls Adm Opr SvcMtu CustId
-----------------------------------------------------------------
2000 0 b-VPLS 0 Up Up 1530 1
2110 123 i-VPLS 2000 Up Up 1514 1
2299 0 b-VPLS 0 Down Down 1514 1
-----------------------------------------------------------------
Matching Services : 3
-----------------------------------------------------------------
A:term17#
labels
Syntax labels
Context show>service>id
Description This command displays the labels being used by the service.
Output Show Service-ID Labels — The following table describes show service-id labels output fields:
*A:ALA-12# show service id 1 labels
==============================================================================
Martini Service Labels
==============================================================================
Svc Id Sdp Id Type I.Lbl E.Lbl
------------------------------------------------------------------------------
1 10:1 Mesh 0 0
1 20:1 Mesh 0 0
1 30:1 Mesh 0 0
1 40:1 Mesh 130081 131061
1 60:1 Mesh 131019 131016
1 100:1 Mesh 0 0
------------------------------------------------------------------------------
Label Description
Svc Id
The service identifier.
Sdp Id
The SDP identifier.
Type
Indicates whether the SDP is spoke or mesh.
I. Lbl
The VC label used by the far-end device to send packets to this device
in this service by the SDP.
E. Lbl
The VC label used by this device to send packets to the far-end device
in this service by the SDP.