Alcatel-Lucent 7750 SR - Page 1657

VPLS Show Commands
7750 SR OS Services Guide Page 1657
-------------------------------------------------------------------------------
MAC Address Registered Declared
-------------------------------------------------------------------------------
01:1e:83:00:00:65 Yes Yes
01:1e:83:00:00:66 Yes Yes
01:1e:83:00:00:67 Yes Yes
01:1e:83:00:00:68 Yes Yes
01:1e:83:00:00:69 Yes Yes
01:1e:83:00:00:6a Yes Yes
01:1e:83:00:00:6b Yes Yes
01:1e:83:00:00:6c Yes Yes
01:1e:83:00:00:6d Yes Yes
01:1e:83:00:00:6e Yes Yes
-------------------------------------------------------------------------------
Number of MACs=10 Registered=10 Declared=10
-------------------------------------------------------------------------------
*A:PE-A#
sdp
Syntax sdp sdp-id:vc-id {mrp}
sdp [sdp-id | far-end ip-addr] [detail]
Context show>service>id
Description This command displays information for the SDPs associated with the service. If no optional
parameters are specified, a summary of all associated SDPs is displayed.
Parameters sdp-id — Displays only information for the specified SDP ID.
Default All SDPs
Values 1 — 17407
far-end ip-addr — Displays only SDPs matching with the specified far-end IP address.
Default SDPs with any far-end IP address.
detail — Displays detailed SDP information.
Output Show Service-ID SDP — The following table describes show service-id SDP output fields.
Label Description
Sdp Id
The SDP identifier.
Type
Indicates whether the SDP is spoke or mesh.
Split Horizon
Group
Indicates the name of the split horizon group that the SDP belongs to.
VC Type
Displays the VC type: ether, vlan, or vpls.
VC Tag
Displays the explicit dot1Q value used when encapsulating to the SDP
far end.