Alcatel-Lucent 7750 SR - Page 1683

VPLS Show Commands
7750 SR OS Services Guide Page 1683
static
Syntax static [sap sap-id | sdp sdp-id:vc-id]
Context show>service>id>igmp-snooping
Description This command displays information on static IGMP snooping source groups for the VPLS service.
Parameters sap sap-id — Displays static IGMP snooping source groups for a specific SAP. See Common CLI
Command Descriptions on page 1933 for command syntax.
sdp sdp-id — Displays the IGMP snooping source groups for a specific spoke or mesh SDP.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to display information.
Default For mesh SDPs only, all VC IDs.
Values 1 — 4294967295
Output Show Output — The following table describes the show output fields:
Sample Output
*A:ALA-1>show>service>id>snooping# static
===============================================================================
IGMP Snooping Static Source Groups for SAP 1/1/2
-------------------------------------------------------------------------------
Source Group
-------------------------------------------------------------------------------
* 225.0.0.2
* 225.0.0.3
-------------------------------------------------------------------------------
Static (*,G)/(S,G) entries: 2
-------------------------------------------------------------------------------
IGMP Snooping Static Source Groups for SDP 10:10
-------------------------------------------------------------------------------
Source Group
-------------------------------------------------------------------------------
1.1.1.1 225.0.0.10
-------------------------------------------------------------------------------
Static (*,G)/(S,G) entries: 1
===============================================================================
*A:ALA-1>show>service>id>snooping#
Label Description
Source
Displays the IP source address used in IGMP queries.
Group
Displays the static IGMP snooping source groups for a specified SAP.