Alcatel-Lucent 7750 SR - Page 1688

Show, Clear, Debug Commands
Page 1688 7750 SR OS Services Guide
ssm-translate
Syntax ssm-translate
Context show>router>igmp
Description This command displays IGMP SSM translate configuration information.
Output GMP Interface Output — The following table provides IGMP field descriptions
A:ALA-48>config>router>igmp# show router igmp ssm-translate
========================================================
IGMP SSM Translate Entries
========================================================
Group Range Source
--------------------------------------------------------
<224.0.1.0 - 224.0.1.255> 1.1.1.1
<225.1.0.0 - 225.240.3.57> 2.2.2.2
<239.255.255.0 - 239.255.255.255> 3.3.3.3
--------------------------------------------------------
SSM Translate Entries : 3
========================================================
A:ALA-48>config>router>igmp#
interface
Syntax interface [ip-int-name | ip-address] [group] [grp-address] [detail]
Context show>router>igmp
Description This command displays IGMP interface information.
Parameters ip-int-name — Only displays the information associated with the specified IP interface name.
ip-address — Only displays the information associated with the specified IP address.
group grp-address — Only displays IP multicast group address for which this entry contains
information.
detail — Displays detailed IP interface information along with the source group information learned
on that interface.
Output IGMP Interface Output — The following table provides IGMP field descriptions.
Label Description
Group Range Displays the address ranges of the multicast groups for which this
router can be an RP.
Source Displays the unicast address that sends data on an interface.
SSM Translate
Entries
Displays the total number of SSM translate entries.