Show, Clear, Debug Commands
Page 1694 7750 SR OS Services Guide
Report V1 0 0
Report V2 0 0
Report V3 0 0
Leaves 0 0
-------------------------------------------------
General Interface Statistics
-------------------------------------------------
Bad Length : 0
Bad Checksum : 0
Unknown Type : 0
Bad Receive If : 0
Rx Non Local : 0
Rx Wrong Version : 0
Policy Drops : 0
No Router Alert : 0
Rx Bad Encodings : 0
Rx Pkt Drops : 0
-------------------------------------------------
Source Group Statistics
-------------------------------------------------
(S,G) : 2
(*,G) : 1
=================================================
A:BA#
status
Syntax status
Context show>router>igmp
Description This command displays IGMP status information.
If IGMP is not enabled, the following message appears:
A:NYC# show router igmp status
MINOR: CLI IGMP is not configured.
A:NYC#
Output IGMP Status Output — The following table provides IGMP status field descriptions
Label Description
Admin State Displays the administrative status of IGMP.
Oper State Displays the current operating state of this IGMP protocol instance
on this router.
Query Interval The frequency at which IGMP query packets are transmitted.
Last Member Query
Interval
The maximum response time inserted into Group-Specific Queries
sent in response to Leave Group messages, and is also the amount of
time between Group-Specific Query messages.
Query Response
Interval
The maximum query response time advertised in IGMPv2 queries.
Robust Count Displays the number of times the router will retry a query.
To Next Page
Loading...
