VPLS Show Commands
7750 SR OS Services Guide Page 1699
statistics
Syntax statistics [sap sap-id
statistics [sdp sdp-id:vc-id]
statistics [interface interface-name]
Context show>service>id>dhcp
Description Displays DHCP statistics information.
Parameters sap sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 1933 for command syntax.
sdp-id — The SDP identifier.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to display information.
Values 1 — 4294967295
interface interface-name — Displays information for the specified IP interface.
summary
Syntax summary
Context show>service>id>dhcp
Description Displays DHCP configuration summary information.
Output Show DHCP Summary Output — The following table describes the output fields for DHCP
summary.
Sample Output
A:ALA-49# show service id 88 dhcp summary
Label Description
Interface Name
Name of the router interface.
Arp Populate
Specifies whether or not ARP populate is enabled.
Used/Provided
Used — The number of lease-states that are currently in use on a spe-
cific interface, that is, the number of clients on that interface got an IP
address by DHCP. This value is always less than or equal to the ‘Pro-
vided’ field.
Provided — The lease-populate value that is configured for a spe-
cific interface.
Info Option
Indicates whether Option 82 processing is enabled on the interface.
Admin State
Indicates the administrative state.
To Next Page
Loading...
