VPLS Clear Commands
7750 SR OS Services Guide Page 1709
Values dot1q port-id | lag-id:qtag1
qinq port-id | lag-id::qtag1.qtag2
qtag1 0 — 4094
qtag2 0 — 4094
mesh-sdp
Syntax mesh-sdp sdp-id[:vc-id] ingress-vc-label
Context clear>service>id
Description This command clears and resets the mesh SDP bindings for the service.
Parameters sdp-id — The mesh SDP ID to be reset.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID to be reset.
Default All VC IDs on the SDP ID.
Values 1 — 4294967295
spoke-sdp
Syntax spoke-sdp sdp-id:vc-id ingress-vc-label
Context clear>service>id
Description This command clears and resets the spoke SDP bindings for the service.
Parameters sdp-id — The spoke SDP ID to be reset.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID to be reset.
Values 1 — 4294967295
sap
Syntax sap sap-id {all | cem | counters | l2pt | stp | mrp}
Context clear>service>statistics
Description This command clears statistics for the SAP bound to the service.
Parameters sap-id — See Common CLI Command Descriptions on page 1933 for command syntax.
all — Clears all queue statistics and STP statistics associated with the SAP.
cem — Clears all CEM statistics associated with the SAP.
counters — Clears all queue statistics associated with the SAP.
To Next Page
Loading...
