Alcatel-Lucent 7750 SR - Page 1717

VPLS Debug Commands
7750 SR OS Services Guide Page 1717
mac
Syntax [no] mac ieee-address
Context debug>service>id>igmp
Description This command shows IGMP packets for the specified MAC address.
The no form of the command disables disables the MAC debugging.
mode
Syntax mode {dropped-only | ingr-and-dropped | egr-ingr-and-dropped}
no mode
Context debug>service>id>igmp
Description This command enables and configures the IGMP tracing mode.
The no form of the command disables the configures the IGMP tracing mode.
sap
Syntax [no] sap sap-id
Context debug>service>id>igmp
Description This command shows IGMP packets for a specific SAP.
The no form of the command disables the debugging for the SAP.
sdp
Syntax [no] sdp sdp-id:vc-id
Context debug>service>id>igmp
Description This command shows IGMP packets for a specific SDP.
The no form of the command disables the debugging for the SDP.
Parameters sdp-id — Displays only IGMP snooping entries associated with the specified mesh SDP or spoke
SDP. For a spoke SDP, the VC ID must be specified, for a mesh SDP, the VC ID is optional.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to display information.
Values 1 — 4294967295