VPLS Debug Commands
7750 SR OS Services Guide Page 1727
packet
Syntax [no] packet [query|v1-report|v2-report|v3-report|v2-leave] [ip-int-name | ip-address]
Context debug>router>igmp
Description This command enables debugging for IGMP packets.
Parameters query v1/v2/v3-report, v2-leave — Select the type of packet to debug.
ip-int-name — Only displays the information associated with the specified IP interface name.
ip-address — Only displays the information associated with the specified IP address.
To Next Page
Loading...
