Show, Clear, Debug Commands
Page 1750 7750 SR OS Services Guide
Last Refresh : 02/09/2009 16:36:38
Persistence Key : N/A
-------------------------------------------------------------------------------
Number of ARP hosts : 1
===============================================================================
*A:Dut-C#
*A:Dut-C# show service id 2 arp-host statistics
==============================================================================
ARP host statistics
==============================================================================
Num Active Hosts : 20
Received Triggers : 70
Ignored Triggers : 10
Ignored Triggers (overload) : 0
SHCV Checks Forced : 0
Hosts Created : 20
Hosts Updated : 40
Hosts Deleted : 0
Authentication Requests Sent : 40
==============================================================================
*A:Dut-C#
*A:Dut-C# show service id 2 arp-host summary
=============================================================
ARP host Summary, service 2
=============================================================
Sap Used Provided Admin State
-------------------------------------------------------------
sap:2/1/5:2 20 8000 inService
-------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------
=============================================================
*A:Dut-C#
statistics
Syntax statistics [policy name] [sap sap-id]
Context show>service>id>authentication
Description Displays session authentication statistics for this service.
Parameters policy name — Specifies the subscriber authentication policy statistics to display.
sap sap-id — Specifies the SAP ID statistics to display. See Common CLI Command Descriptions on
page 1933 for command syntax.
See Common CLI Command Descriptions on page 1933 for command syntax.
Sample Output
*A:ALA-1# show service id 11 authentication statistics