IES Show Commands
7750 SR OS Services Guide Page 1765
sap
Syntax sap sap-id [detail]
Context show>service>id
Description Displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters sap-id — The ID that displays SAPs for the service in the slot/mda/port[.channel format. See
Common CLI Command Descriptions on page 1933 for command syntax.
detail — Displays detailed information for the SAP.
Output Show Service-ID SAP — The following table describes show service SAP fields:
Label Description
Service Id
The service identifier.
SAP
The type of SAP.
Encap
The encapsulation type of the SAP.
Ethertype
Specifies an Ethernet type II Ethertype value.
Admin State
The administrative state of the SAP.
Oper State
The operational state of the SAP.
Flags
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, Inter-
faceAdminDown, PortOperDown, PortMTUTooSmall, L2OperDown,
SapIngressQoSMismatch, SapEgressQoSMismatch,RelearnLimitEx-
ceeded, RxProtSrcMac, ParentIfAdminDown, NoSapIpipeCeIpAddr,
TodResourceUnavail, TodMssResourceUnavail, SapParamMismatch,
CemSapNoEcidOrMacAddr, StandByForMcRing, ServiceMTUTooS-
mall, SapIngressNamedPoolMismatch, SapEgressNamedPoolMis-
match, NoSapEpipeRingNode.
Last Status Change
Specifies the time of the most recent operating status change to this
SAP.
Last Mgmt Change
Specifies the time of the most recent management-initiated change to
this SAP.
Admin MTU
The desired largest service frame size (in octets) that can be transmitted
through the SAP to the far-end router, without requiring the packet to be
fragmented.
Ingress qos-pol-
icy
The ingress QoS policy ID assigned to the SAP.
Egress qos-policy
The egress QoS policy ID assigned to the SAP.
Ingress Filter-Id
The ingress filter policy ID assigned to the SAP.
To Next Page
Loading...
