IES Show Commands
7750 SR OS Services Guide Page 1767
A:ALA-49# show service id 88 sap 7/1/1.2.2
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id : 88
SAP : 1/1/1.2.2 Encap : bcpNull
Admin State : Up Oper State : Down
Flags : PortOperDown
SapEgressQoSMismatch
Last Status Change : 06/06/2006 08:22:07
Last Mgmt Change : 06/06/2006 14:15:58
Admin MTU : 1518 Oper MTU : 1518
Ingress qos-policy : 2 Egress qos-policy : 1020
Shared Q plcy : default Multipoint shared : Enabled
Ingress Filter-Id : n/a Egress Filter-Id : n/a
tod-suite : None
Multi Svc Site : None
Acct. Pol : None Collect Stats : Disabled
Anti Spoofing : None Nbr Static Hosts : 0
-------------------------------------------------------------------------------
Subscriber Management
-------------------------------------------------------------------------------
Admin State : Down MAC DA Hashing : False
Def Sub-Profile : None
Def SLA-Profile : None
Sub-Ident-Policy : None
Subscriber Limit : 1
Single-Sub-Parameters
Prof Traffic Only : False
Non-Sub-Traffic : N/A
===============================================================================
A:ALA-49#
sdp
Syntax sdp [{sdp-id | far-end ip-address }] [detail]]
Context show>service>id
Description Displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters sdp-id — The SDP ID for which to display information.
Values 1 — 17407
far-end ip-address — When specified, displays SDP having the specified far-end IP address.
detail — Displays detailed information for the SDP.
Sample Output
A:Dut-A# show service id 1 sdp detail
===============================================================================
Services: Service Destination Points Details
===============================================================================
Sdp Id 1:1 -(10.20.1.2)
To Next Page
Loading...
