Alcatel-Lucent 7750 SR - Page 1772

Show, Clear, Debug Commands
Page 1772 7750 SR OS Services Guide
summary
Syntax summary
Context show>router>dhcp
Description Displays the status of the DHCP relay and DHCP snooping functions on each interface.
Output Show DHCP Summary Output — The following table describes the output fields for DHCP
summary.
Sample Output
A:ALA-49# show router dhcp summary
===============================================================================
DHCP Summary (Router: Base)
===============================================================================
Interface Name Arp Used/ Info Admin
SapId/Sdp Populate Provided Option State
-------------------------------------------------------------------------------
Sector A No 0/0 Keep Up
sap:7/1/1.2.2 0/0
grp-if No 0/1 Keep Down
ies-test No 0/0 Keep Up
sap:9/1/2:0/500 0/0
test No 0/0 Keep Up
sap:10/1/2:0 0/0
test1 No 0/0 Keep Up
sap:7/1/1.1.2 0/0
test2 No 0/0 Keep Up
sap:7/1/1.2.1 0/0
testA No 0/0 Keep Up
sap:7/1/3.1.1 0/0
testB No 0/0 Keep Up
sap:7/1/5.1.1 0/0
to-HQ No 0/0 Keep Up
sdp:spoke-2:1001 0/0
to-web No 0/0 Keep Up
sap:2/1/10:50 0/0
-------------------------------------------------------------------------------
Label Description
Interface Name
Name of the router interface.
SapId/Sdp
Specifies the associated SAP ID or SDP ID.
Arp Populate
Specifies whether or not ARP populate is enabled.
Used/Provided
Used — The number of lease-states currently in use on a specific
interface (the number of clients on that interface got an IP address by
DHCP). This value is always less than or equal to the ‘Provided’ field.
Provided — The configured for a specific interface.
Info Option
Indicates whether Option 82 processing is enabled on the interface.
Admin State
Indicates the administrative state.