Alcatel-Lucent 7750 SR - Page 1783

IES Debug Commands
7750 SR OS Services Guide Page 1783
SAP.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 1933 for command syntax.
packets
Syntax [no] packets
[no] packets interface ip-int-name [vrid virtual-router-id]
[no] packets interface ip-int-name vrid virtual-router-id ipv6
Context debug>router>vrrp
Description This command enables or disables debugging for VRRP packets.
Parameters ip-int-name — [32 chars max]
virtual-router-id — [1..255]
events
Syntax [no] events
[no] events interface ip-int-name [vrid virtual-router-id]
[no] events interface ip-int-name vrid virtual-router-id ipv6
Context debug>router>vrrp
Description This command enables or disables debugging for VRRP events.
Parameters ip-int-name — [32 chars max]
virtual-router-id — [1..255]
instance
Syntax instance interface interface-name vr-id virtual-router-id [ipv6] [interval seconds] [repeat
repeat] [absolute|rate]
Context monitor>router>vrrp
Description This command enables monitoring for statistics for VRRP instances.