Alcatel-Lucent 7750 SR - Page 1796

Show, Clear, Debug Commands
Page 1796 7750 SR OS Services Guide
10 mVPLS Down Down 1 10/26/2006 15:44:57
11 mVPLS Down Down 1 10/26/2006 15:44:57
100 mVPLS Up Up 1 10/26/2006 15:44:57
101 mVPLS Up Up 1 10/26/2006 15:44:57
102 mVPLS Up Up 1 10/26/2006 15:44:57
999 uVPLS Down Down 1 10/26/2006 16:14:33
-------------------------------------------------------------------------------
Matching Services : 8
-------------------------------------------------------------------------------
A:de14#
id
Syntax id service-id {all | arp | base | fdb | labels | mfib | sap | sdp | split-horizon-group | stp}
Context show>service
Description This command displays information for a particular service-id.
Parameters service-id — The unique service identification number that identifies the service in the service
domain.
all — Display detailed information about the service.
arp — Display ARP entries for the service.
base — Display basic service information.
fdb — Display FDB entries.
interface — Display service interfaces.
labels — Display labels being used by this service.
sap — Display SAPs associated to the service.
sdp — Display SDPs associated with the service.
split-horizon-group — Display split horizon group information.
stp — Display STP information.
all
Syntax all
Context show>service>id
Description Displays detailed information for all aspects of the service.
Output Show All Service-ID Output — The following table describes the show all service-id command
output fields: