Alcatel-Lucent 7750 SR - Page 1814

Show, Clear, Debug Commands
Page 1814 7750 SR OS Services Guide
authentication
Syntax authentication
Context show>service>id
Description This command enables the context to display subscriber authentication information.
statistics
Syntax statistics [policy name] [sap sap-id]
Context show>service>id>authentication
Description This command displays session authentication statistics for this service.
Parameters policy name — Specifies the subscriber authentication policy statistics to display.
sap sap-id — Specifies the SAP ID statistics to display. See Common CLI Command Descriptions on
page 1933 for command syntax.
Sample Output
*A:ALA-1# show service id 11 authentication statistics
===============================================================
Authentication statistics
===============================================================
Interface / SAP Authentication Authentication
Successful Failed
---------------------------------------------------------------
vpls-11-90.1.0.254 1582 3
---------------------------------------------------------------
Number of entries: 1
===============================================================
*A:ALA-1#
arp
Syntax arp [ip-address] | [mac ieee-address] | [sap sap-id] | [interface ip-int-name] [sdp sdp-id:vc-
id] [summary]
Context show>service>id
Description Displays the ARP table for the IES instance.
Parameters ip-address — Displays only ARP entries in the ARP table with the specified IP address.
Default All IP addresses.