VPRN Show Commands
7750 SR OS Services Guide Page 1827
summary
Syntax summary
Context show>service>id>dhcp
Description This command displays DHCP configuration summary information.
Show Service-ID DHCP Summary — The following table describes show service-id DHCP
summary output fields:
Sample Output
A:ALA-49# show service id 1 dhcp summary
===============================================================================
DHCP Summary, service 1
===============================================================================
Interface Name Arp Used/ Info Admin
SapId/Sdp Populate Provided Option State
-------------------------------------------------------------------------------
SpokeSDP No 0/0 Keep Up
sdp:spoke-3:4 0/0
test No 0/0 Keep Up
sap:1/1/4:50/5 0/0
to-ce1 No 0/0 Keep Up
sap:1/1/10:1 0/0
-------------------------------------------------------------------------------
Interfaces: 3
===============================================================================
Label Description
Sap/Sdp
The configuration identification, expressed by a string containing
“card/mda/port/:logical-id”.
Snoop
Yes — The packets received from the DHCP clients were snooped.
No — The packets received from the DHCP clients were not snooped.
Used/Provided
Used — The number of lease-states that are currently in use on a spe-
cific interface, that is, the number of clients on that interface got an IP
address by DHCP. This value is always less than or equal to the ‘Pro-
vided’ field.
Provided — The lease-populate value that is configured for a spe-
cific interface.
Arp Reply Agent
Displays whether or not there is proper handling of received ARP
requests from subscribers.
Info Option
Keep — The existing information is kept on the packet and the router
does not add any additional information.
Replace — On ingress, the existing information-option is replaced
with the information-option from the router.
Drop — The packet is dropped and an error is logged.
Admin State
Indicates the administrative state.
To Next Page
Loading...
