Show, Clear, Debug Commands
Page 1858 7750 SR OS Services Guide
*A:ALA-12# show router 3 bgp neighbor 10.0.0.16 received-routes
==============================================================================
BGP Router ID : 10.0.0.16 AS : 65206 Local AS : 65206
===============================================================================
Legend -
Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid
Origin codes : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP Neighbor
===============================================================================
Flag Network Nexthop LocalPref MED As-Path
-------------------------------------------------------------------------------
? 10.0.0.16/32 10.0.0.16 100 none No As-Path
? 10.0.6.0/24 10.0.0.16 100 none No As-Path
? 10.0.8.0/24 10.0.0.16 100 none No As-Path
? 10.0.12.0/24 10.0.0.16 100 none No As-Path
? 10.0.13.0/24 10.0.0.16 100 none No As-Path
? 10.0.204.0/24 10.0.0.16 100 none No As-Path
===============================================================================
*A:ALA-12#
paths
Syntax paths
Context show>router>bgp
Description This command displays a summary of BGP path attributes.
Output Show Path Output — The following table describes the command output fields for a BGP path.
Label Description
BGP Router ID
The local BGP router ID.
AS
The configured autonomous system number.
Local AS
The configured local AS setting. If not configured, then the value is the
same as the AS.
Path
The AS path attribute.
Origin
EGP — The NLRI is learned by an EGP protocol.
IGP — The NLRI is interior to the originating AS.
INCOMPLETE — NLRI was learned another way.
Next Hop
The advertised BGP nexthop.
MED
The Multi-Exit Discriminator value.
Local Preference
The local preference value.
Refs
The number of routes using a specified set of path attributes.