Alcatel-Lucent 7750 SR - Page 1866

Show, Clear, Debug Commands
Page 1866 7750 SR OS Services Guide
interface
Syntax interface [{[ip-address | ip-int-name] [detail]}] | [summary] | [exclude-services]
Context show>router
Description This command displays the router IP interface table sorted by interface index.
Parameters ip-address — Only displays the interface information associated with the specified IP address.
ip-int-name — Only displays the interface information associated with the specified IP interface
name.
detail — Displays detailed IP interface information.
summary — Displays summary IP interface information for the router.
exclude-services — Displays IP interface information, excluding IP interfaces configured for
customer services. Only core network IP interfaces are displayed.
Output Standard IP Interface Output — The following table describes the standard output fields for an
IP interface:
Sample Output
*A:ALA-12# show router 3 interface
===============================================================================
Interface Table
Label Description
Interface-Name
The IP interface name.
Type
n/a — No IP address has been assigned to the IP interface, so the IP
address type is not applicable.
Pri — The IP address for the IP interface is the Primary address on
the IP interface.
Sec — The IP address for the IP interface is a secondary address on
the IP interface.
IP-Address
The IP address and subnet mask length of the IP interface.
n/a — Indicates no IP address has been assigned to the IP interface.
Adm
Down — The IP interface is administratively disabled.
Up — The IP interface is administratively enabled.
Opr
Down — The IP interface is operationally disabled.
Up — The IP interface is operationally enabled.
Mode
Network — The IP interface is a network/core IP interface.
Service — The IP interface is a service IP interface.