Alcatel-Lucent 7750 SR - Page 1876

Show, Clear, Debug Commands
Page 1876 7750 SR OS Services Guide
peer
Syntax peer [ip-int-name]
Context show>router>rip
Description Displays RIP peer information.
Parameters ip-int-name — Dispays peer information for peers on the specified IP interface.
Default Display peers for all interfaces.
Output Show RIP Peer Output — The following table describes the command output fields for a RIP
peer:
statistics
Syntax statistics [ip-addr | ip-int-name]
Context show>router>rip
Description Display Interface level statistics for the RIP protocol.
If no IP address or interface name is specified, then all configured RIP interfaces are displayed.
If an IP address or interface name is specified, then only data regarding the specified RIP interface is
displayed.
Parameters ip-addr | ip-int-name — Displays statistics for the specified IP interface.
Output Show RIP Statistics Output — The following table describes the output fields for RIP statistics.
Sample Output
Label Description
Peer IP Addr
The IP address of the peer router.
Interface Name
The peer interface name.
Version
The version of RIP running on the peer.
Last Update
The number of days since the last update.
No. of Peers
The number of RIP peers.
Label Description
Learned Routes
The number of RIP-learned routes were exported to RIP neighbors.
Timed Out Routes
The number of routes that have been timed out.
Current Memory
The amount of memory used by this RIP router instance.