Alcatel-Lucent 7750 SR - Page 1880

Show, Clear, Debug Commands
Page 1880 7750 SR OS Services Guide
route-table
Syntax route-table [ip-prefix [/mask] [longer] | [protocol protocol] | [summary]]
Context show>router
Description This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters ip-prefix[/mask] — Displays routes only matching the specified ip-prefix and optional mask.
longer — Displays routes matching the ip-prefix/mask and routes with longer masks.
protocol protocol — Displays routes learned from the specified protocol.
Values bgp, isis, local, ospf, rip, static, aggregate
summary — Displays a route table summary information.
Output Standard Show Route Table Output — The following table describes the standard output fields
for the route table.
Sample Output
*A:ALA-12# show router 3 route-table
==============================================================================
Route Table
==============================================================================
Dest Address Next Hop Type Protocol Age Metric Pref
------------------------------------------------------------------------------
10.10.0.1/32 10.10.13.1 Remote OSPF 65844 1001 10
10.10.0.2/32 10.10.13.1 Remote OSPF 65844 2001 10
10.10.0.3/32 0.0.0.0 Local Local 1329261 0 0
10.10.0.4/32 10.10.34.4 Remote OSPF 3523 1001 10
10.10.0.5/32 10.10.35.5 Remote OSPF 1084022 1001 10
10.10.12.0/24 10.10.13.1 Remote OSPF 65844 2000 10
10.10.13.0/24 0.0.0.0 Local Local 65859 0 0
Label Description
Dest Address
The route destination address and mask.
Next Hop
The next hop IP address for the route destination.
Type
Local — The route is a local route.
Remote — The route is a remote route.
Protocol
The protocol through which the route was learned.
Age
The route age in seconds for the route.
Metric
The route metric value for the route.
Pref
The route preference value for the route.
No. of Routes:
The number of routes displayed in the list.