Alcatel-Lucent 7750 SR - Page 1892

Show, Clear, Debug Commands
Page 1892 7750 SR OS Services Guide
Parameters slot-number — Clears the specified IOM slot.
Default all IOMs
Values 1 - 10
interface
Syntax interface [ip-int-name | ip-addr] [icmp]
Context clear>router
Description This command clears IP interface statistics.
If no IP interface is specified either by IP interface name or IP address, the command will perform the
clear operation on all IP interfaces.
Parameters ip-int-name | ip-addr — The IP interface name or IP interface address.
Default All IP interfaces.
icmp — Specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limit.
damping
Syntax damping [[ip-prefix/mask] [neighbor ip-address]] | [group name]
Context clear>router>bgp
Description This command clears or resets the route damping information for received routes.
Parameters ip-prefix/mask — Clears damping information for entries that match the IP prefix and mask length.
neighbor ip-address — Clears damping information for entries received from the BGP neighbor.
group name — Clears damping information for entries received from any BGP neighbors in the peer
group.
flap-statistics
Syntax flap-statistics [[ip-prefix/mask] [neighbor ip-addr]] | [group group-name] | [regex reg-exp] |
[policy policy-name]
Context clear>router>bgp
Description This command clears route flap statistics.
Parameters ip-prefix/mask — Clears route flap statistics for entries that match the specified IP prefix and mask
length.
neighbor ip-addr — Clears route flap statistics for entries received from the specified BGP neighbor.