Alcatel-Lucent 7750 SR - Page 1904

Show, Clear, Debug Commands
Page 1904 7750 SR OS Services Guide
misc
Syntax [no] misc
Context debug>router>igmp
Description This command enables debugging for IGMP miscellaneous.
The no form of the command disables debugging.
Sample Output
A:BA# debug router 100 igmp misc
A:BA# show debug
debug
router "100"
igmp
misc
exit
exit
exit
A:BA#
packet
Syntax [no] packet [query|v1-report|v2-report|v3-report|v2-leave] [ip-int-name | ip-address]
Context debug>router>igmp
Description This command enables debugging for IGMP packets.
The no form of the command disables debugging.
Parameters query v1/v2/v3-report, v2-leave — Select the type of packet to debug.
ip-int-name — Only displays the information associated with the specified IP interface name.
ip-address — Only displays the information associated with the specified IP address.
Sample Output
A:BA# debug router 100 igmp packet
A:BA#
A:BA# show debug
debug
router "100"
igmp
packet
exit
exit
exit
5 2006/09/03 22:20:05.73 UTC MINOR: DEBUG #2001 vprn100 IGMP[2]
"IGMP[2]: TX-PKT
[000 18:25:24.480] ifId:2 ifName:IGMP_to_CE IGMP V3 PDU: 11.1.1.1 -> 224.0.0.1 p
duLen 12
Type: QUERY maxrespCode 0xa checkSum 0xec78