Alcatel-Lucent 7750 SR - Page 1916

Show, Clear, Debug Commands
Page 1916 7750 SR OS Services Guide
sap sap-id — Specifies the SAP ID statistics to display. See Common CLI Command Descriptions on
page 1933 for command syntax.
all
Syntax all
Context show>service>id
Description Displays detailed information for all aspects of the service.
Output Show All Service-ID Output — The following table describes the show all service-id command
output fields:
Label Description
Service Id
The service identifier.
VPN Id
The number which identifies the VPN.
Service Type
Specifies the type of service.
VLL Type
Specifies the VLL type.
SDP Id
The SDP identifier.
Description
Generic information about the service.
Customer Id
The customer identifier.
Last Mgmt Change
The date and time of the most recent management-initiated change
Flags
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, Inter-
faceAdminDown, PortOperDown, PortMTUTooSmall, L2OperDown,
SapIngressQoSMismatch, SapEgressQoSMismatch,RelearnLimitEx-
ceeded, RxProtSrcMac, ParentIfAdminDown, NoSapIpipeCeIpAddr,
TodResourceUnavail, TodMssResourceUnavail, SapParamMismatch,
CemSapNoEcidOrMacAddr, StandByForMcRing, ServiceMTUTooS-
mall, SapIngressNamedPoolMismatch, SapEgressNamedPoolMis-
match, NoSapEpipeRingNode.
SAP Count
The number of SAPs specified for this service.
SDP Bind Count
The number of SDPs bound to this service.
Split Horizon
Group
Name of the split horizon group for this service.
Description
Description of the split horizon group.
Last Changed
The date and time of the most recent management-initiated change to
this split horizon group.
SDP Id
The SDP identifier.