Alcatel-Lucent 7750 SR - Page 1918

Show, Clear, Debug Commands
Page 1918 7750 SR OS Services Guide
Number of SDPs
The total number SDPs applied to this service ID.
Service Id
The service identifier.
Port Id
The ID of the access port where this SAP is defined.
Description
Generic information about the SAP.
Encap Value
The value of the label used to identify this SAP on the access port.
Admin State
The desired state of the SAP.
Oper State
The operating state of the SAP.
Last Changed
The date and time of the last change.
Admin MTU
The desired largest service frame size (in octets) that can be transmit-
ted through this SDP to the far-end router, without requiring the packet
to be fragmented.
Oper MTU
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to
be fragmented.
Ingress qos-pol-
icy
The SAP ingress QoS policy ID.
Egress qos-policy
The SAP egress QoS policy ID.
Ingress Filter-Id
The SAP ingress filter policy ID.
Egress Filter-Id
The SAP egress filter policy ID.
Multi Svc Site
Indicates the multi-service site that the SAP is a member of.
Ingress sched-
policy
Indicates the ingress QoS scheduler for the SAP.
Egress sched-pol-
icy
Indicates the egress QoS scheduler for the SAP.
Acct. Pol
Indicates the accounting policy applied to the SAP.
Collect Stats
Specifies whether accounting statistics are collected on the SAP.
Dropped
The number of packets or octets dropped.
Offered Hi Prior-
ity
The number of high priority packets, as determined by the SAP ingress
QoS policy.
Offered Low Prior-
ity
The number of low priority packets, as determined by the SAP ingress
QoS policy.
Forwarded In Pro-
file
The number of in-profile packets or octets (rate below CIR) forwarded.
Forwarded Out Pro-
file
The number of out-of-profile packets or octets (rate above CIR) for-
warded.
Label Description (Continued)