7750 SR OS Services Guide Page 1929
sdp
Syntax sdp [sdp-id | far-end ip-addr] [detail]
Context show>service>id
Description Displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters sdp-id — Displays only information for the specified SDP ID.
Default All SDPs.
Values 1 — 17407
far-end ip-addr — Displays only SDPs matching the specified far-end IP address.
Default SDPs with any far-end IP address.
detail — Displays detailed SDP information.
Output Show Service-ID SDP — The following table describes show service-id SDP output fields:
For. InProf
The number of in-profile packets and octets (rate below CIR) for-
warded by the egress Qchip.
For. OutProf
The number of out-of-profile packets and octets (rate above CIR) for-
warded by the egress Qchip.
Ingress TD Profile
The profile ID applied to the ingress SAP.
Egress TD Profile
The profile ID applied to the egress SAP.
Alarm Cell Han-
dling
The indication that OAM cells are being processed.
AAL-5 Encap
The AAL-5 encapsulation type.
Label Description (Continued)
Label Description
Sdp Id
The SDP identifier.
Type
Indicates whether the SDP is a spoke or a mesh.
Split Horizon
Group
Name of the split horizon group that the SDP belongs to.
VC Tag
The explicit dot1Q value used when encapsulating to the SDP far end.
I. Lbl
The VC label used by the far-end device to send packets to this device
in this service by the SDP.
Admin Path MTU
The operating path MTU of the SDP is equal to the admin path MTU
(when one is set) or the dynamically computed tunnel MTU, when no
admin path MTU is set (the default case.)
To Next Page
Loading...
