7750 SR OS Services Guide Page 1937
sap ipsec-id.private|public:tag — This parameter associates an IPSec group SAP with this interface. This
is the public side for an IPSec tunnel. Tunnels referencing this IPSec group in the private side may be
created if their local IP is in the subnet of the interface subnet and the routing context specified matches
with the one of the interface.
This context will provide a SAP to the tunnel. The operator may associate an ingress and egress QoS
policies as well as filters and virtual scheduling contexts. Internally this creates an Ethernet SAP that
will be used to send and receive encrypted traffic to and from the MDA. Multiple tunnels can be
associated with this SAP. The “tag” will be a dot1q value. The operator may see it as an identifier. The
range is limited to 1 — 4095.
To Next Page
Loading...
