Virtual Leased Line Services
7750 SR OS Services Guide Page 327
no ipipe service-id
Context config>service
Description This command configures an IP-Pipe service.
Parameters service-id — The unique service identification number or string identifying the service in the service
domain. This ID must be unique to this service and may not be used for any other service of any
type. The service-id must be the same number used for every 7750 SR, 7450 ESS and 7710 SR
on which this service is defined.
Values service-id: 1 — 2147483648
svc-name: 64 characters maximum
customer customer-id — Specifies the customer ID number to be associated with the service. This
parameter is required on service creation and optional for service editing or deleting.
Values 1 — 2147483647
vpn vpn-id — Specifies the VPN ID number which allows you to identify virtual private networks
(VPNs) by a VPN identification number.
vpn-id
Values 1 — 2147483647
Default null (0)
vc-switching — Specifies if the pseudowire switching signalling is used for the spoke SDPs
configured in this service.
create — Keyword used to create the Ipipe service instance. The create keyword requirement can be
enabled/disabled in the environment>create context.
ce-address-discovery
Syntax [no] ce-address-discovery
Context config>service>ipipe
Description This command specifies whether the service will automatically discover the CE IP addresses.
When enabled, the addresses will be automatically discovered on SAPs that support address
discovery, and on the spoke SDPs. When enabled, addresses configuration on the Ipipe SAP and
spoke SDPs will not be allowed.
If disabled, CE IP addresses must be manually configured for the SAPs to become operationally up.
endpoint
Syntax [no] endpoint endpoint-name
Context config>service>apipe
config>service>cpipe
config>service>fpipe
config>service>epipe
To Next Page
Loading...
