Virtual Leased Line Services
7750 SR OS Services Guide Page 355
mac mac-filter-id — Specifies the MAC filter policy. The specified filter ID must already exist
within the created MAC filters. The filter policy must already exist within the created MAC
filters.
Values 1 — 65535
hsmda-queue-override
Syntax [no] hsmda-queue-override
Context config>service>epipe>sap>egress
config>service>epipe>sap>ingress
config>service>ipipe>sap>egress
config>service>ipipe>sap>ingress
Description This command configures HSMDA egress and ingress queue overrides.
packet-byte-offset
Syntax packet-byte-offset {add add-bytes | subtract sub-bytes}
no packet-byte-offset
Context config>service>epipe>sap>egress>hsmda-queue-over
config>service>epipe>sap>ingress>hsmda-queue-over
config>service>ipipe>sap>egress>hsmda-queue-over
config>service>ipipe>sap>ingress>hsmda-queue-over
Description This command adds or subtracts the specified number of bytes to the accounting function for each
packet handled by the HSMDA queue. Normally, the accounting and leaky bucket functions are based
on the Ethernet DLC header, payload and the 4-byte CRC (everything except the preamble and inter-
frame gap). For example, this command can be used to add the frame encapsulation overhead (20
bytes) to the queues accounting functions.
The accounting functions affected include:
• Offered High Priority / In-Profile Octet Counter
• Offered Low Priority / Out-of-Profile Octet Counter
• Discarded High Priority / In-Profile Octet Counter
• Discarded Low Priority / Out-of-Profile Octet Counter
• Forwarded In-Profile Octet Counter
• Forwarded Out-of-Profile Octet Counter
• Peak Information Rate (PIR) Leaky Bucket Updates
• Committed Information Rate (CIR) Leaky Bucket Updates
• Queue Group Aggregate Rate Limit Leaky Bucket Updates
The secondary shaper leaky bucket, scheduler priority level leaky bucket and the port maximum rate
updates are not affected by the configured packet-byte-offset. Each of these accounting functions are
To Next Page
Loading...
