VLL Service Configuration Commands
Page 372 7750 SR OS Services Guide
channel or slot. Scheduler policies are defined in the config>qos>scheduler-policy scheduler-policy-
name context.
The no form of this command removes the configured ingress or egress scheduler policy from the
multi-service customer site. When the policy is removed, the schedulers created due to the policy are
removed also making them unavailable for the ingress SAP queues associated with the customer site.
Queues that lose their parent scheduler association are deemed to be orphaned and are no longer
subject to a virtual scheduler. The SAPs that have ingress queues reliant on the removed schedulers
enter into an operational state depicting the orphaned status of one or more queues. When the no
scheduler-policy command is executed, the customer site ingress or egress node will not contain an
applied scheduler policy.
scheduler-policy-name — The scheduler-policy-name parameter applies an existing scheduler policy
that was created in the config>qos>scheduler-policy scheduler-policy-name context to create
the hierarchy of ingress or egress virtual schedulers. The scheduler names defined within the
policy are created and made available to any ingress or egress queues created on associated
SAPs.
vlan-translation
Syntax vlan-translation {vlan-id | copy-outer}
no vlan-translation
Context config>service>epipe>sap>ingress
Description This command configures ingress VLAN translation. If enabled with an explicit VLAN value, the
preserved vlan-id will be overwritten with this value. This setting is applicable to dot1q encapsulated
ports. If enabled with “copy-outer” keyword, the outer vlan-id will be copied to inner position on
QinQ encapsulated ports. The feature is not supported on default-dot1q saps (1/1/1:* and 1/1/1:0), nor
on TopQ saps.
The no version of the command sets the default value and no action will be taken.
Default Per default, the preserved VLAN values will not be overwritten.
Parameters vlan-id — Specifies that the preserved vlan-id will be overwritten with this value.
Values 0 — 4094
outer-copy — Keyword specifies to use the outer VLAN ID.
match-qinq-dot1p
Syntax match-qinq-dot1p {top | bottom}
no match-qinq-dot1p de
Context config>service>ipipe>sap>ingress
config>service>epipe>sap>ingress
Description This command specifies which Dot1Q tag position Dot1P bits in a QinQ encapsulated packet should
be used to evaluate Dot1P QoS classification.
To Next Page
Loading...
