VLL Service Configuration Commands
Page 416 7750 SR OS Services Guide
precedence
Syntax precedence [precedence-value| primary]
no precedence
Context config>service>cpipe>spoke-sdp
Description This command
specifies the precedence of the SDP binding when there are multiple SDP bindings
attached to one service endpoint. The value of zero can only be assigned to one SDP bind making it
the primary SDP bind. When an SDP binding goes down, the next highest precedence SDP binding
will begin to forward traffic.
The no form of the command returns the precedence value to the default.
Default 4
Parameters precedence-value — Specifies the spoke SDP precedence.
Values 1 — 4
primary — Specifies to make this the primary spoke SDP.
To Next Page
Loading...
