Alcatel-Lucent 7750 SR - Page 535

Virtual Private LAN Services
7750 SR OS Services Guide Page 535
Configuring VPLS SAPs with Split Horizon
To configure a VPLS service with a split horizon group, add the split-horizon-group parameter
when creating the SAP. Traffic arriving on a SAP within a split horizon group will not be copied
to other SAPs in the same split horizon group.
The following example displays a VPLS configuration with split horizon enabled:
*A:ALA-1>config>service# info
----------------------------------------------
...
vpls 800 customer 6001 vpn 700 create
description "VPLS with split horizon for DSL"
stp
shutdown
exit
sap 1/1/3:100 split-horizon-group DSL-group1 create
description "SAP for residential bridging"
exit
sap 1/1/3:200 split-horizon-group DSL-group1 create
description "SAP for residential bridging"
exit
split-horizon-group DSL-group1
description "Split horizon group for DSL"
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-1>config>service#