Alcatel-Lucent 7750 SR - Page 543

Virtual Private LAN Services
7750 SR OS Services Guide Page 543
Use the following CLI syntax to configure spoke SDP bindings:
Spoke SDP
CLI Syntax: config>service# vpls service-id
spoke-sdp sdp-id:vc-id [vc-type {ether | vlan}] [split-hori-
zon-group group-name]
egress
filter {ip ip-filter-id|mac mac-filter-id}
vc-label egress-vc-label
ingress
filter {ip ip-filter-id|mac mac-filter-id}
vc-label ingress-vc-label
limit-mac-move[non-blockable]
vlan-vc-tag 0..4094
no shutdown
static-mac ieee-address
stp
path-cost stp-path-cost
priority stp-priority
no shutdown
vlan-vc-tag [0..4094]
The following displays SDP binding configurations for ALA-1, ALA-2, and ALA-3 for VPLS
service ID 9000 for customer 6:
*A:ALA-1>config>service# info
----------------------------------------------
...
vpls 9000 customer 6 create
description "This is a distributed VPLS."
def-mesh-vc-id 750
stp
shutdown
exit
sap 1/2/5:0 create
exit
spoke-sdp 2:22 create
exit
mesh-sdp 5:750 create
exit
mesh-sdp 7:750 create
exit
no shutdown
exit
----------------------------------------------
*A:ALA-1>config>service#
*A:ALA-2>config>service# info
----------------------------------------------
...
vpls 9000 customer 6 create
description "This is a distributed VPLS."