Virtual Private LAN Services
7750 SR OS Services Guide Page 573
Service specific commands continue to be available to display service specific information,
including status.
PERs6# show service sdp-using
===============================================================================
SDP Using
===============================================================================
SvcId SdpId Type Far End Opr S* I.Label E.Label
-------------------------------------------------------------------------------
100 17406:4294967295 BgpAd 1.1.1.134 Up 131063 131067
-------------------------------------------------------------------------------
Number of SDPs : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
BGP AD will advertise the VPLS-ID in the extended community attribute, VSI-ID in the NLRI
and the local PE id in the BGP next hop. At the receiving PE, the VPLS-ID is compared against
locally provisioned information to determine whether the two PEs share a common VPLS. If it is
found that they do, the BGP information is used in the signaling phase (see BGP VPLS
Configuration Example on page 574).
To Next Page
Loading...
