Alcatel-Lucent 7750 SR - Page 631

Virtual Private LAN Services
7750 SR OS Services Guide Page 631
Default disabled
fdb-table-high-wmark
Syntax [no] fdb-table-high-wmark high-water-mark
Context config>service>vpls
Description
This command specifies the value to send logs and traps when the threshold is reached.
Parameters high-water-mark — Specify the value to send logs and traps when the threshold is reached.
Values 0— 100
Default 95%
fdb-table-low-wmark
Syntax [no] fdb-table-low-wmark low-water-mark
Context config>service>vpls
Description
This command specifies the value to send logs and traps when the threshold is reached.
Parameters low-water-mark — Specify the value to send logs and traps when the threshold is reached.
Values 0— 100
Default 90%
fdb-table-size
Syntax fdb-table-size table-size
no fdb-table-size [table-size]
Context config>service>vpls
Description This command specifies the maximum number of MAC entries in the forwarding database (FDB) for
the VPLS instance on this node.
The fdb-table-size specifies the maximum number of forwarding database entries for both learned
and static MAC addresses for the VPLS instance.
The no form of this command returns the maxium FDB table size to default.
Default 250 — Forwarding table of 250 MAC entries.
Parameters table-size — Specifies the maximum number of MAC entries in the FDB.
Values 1 — 511999
Chassis-mode A or B limit: 131071
Chassis-mode C limit: 196607
Chassis-mode D limit: 511999