Alcatel-Lucent 7750 SR - Page 646

Virtual Private LAN Services
Page 646 7750 SR OS Services Guide
sap
Syntax sap sap-id
no sap
Context config>service>vpls>site
Description This command configures a SAP for the site.
The no form of the command removes the SAP ID from the configuration.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 1933 for command syntax.
site-activation-timer
Syntax site-activation-timer seconds
no site-activation-timer
Context config>service>vpls>site
Description This command configures the time-period the system keeps the local sites in standby status, waiting
for BGP updates from remote PEs before running the DF (designated-forwarder) election algorithm
to decide whether the site should be unblocked.
The no form of the command removes the value from the configuration.
Default no site-activation-timer
Parameters seconds — Specifies the site activation timer.
Values 1 — 100
site-id
Syntax site-id value
no site-id
Context config>service>vpls>site
Description This command configures the identifier for the site in this service.
Parameters value — Specifies the site identifier.
Values 1 — 65535