Virtual Private LAN Services
Page 650 7750 SR OS Services Guide
Description This command configures a static host on this SAP.
Syntax ip ip-address — Specifies the IPv4 unicast address.
mac ieee-address — Specify this optional parameter when defining a static host. Every static host
definition must have at least one address defined, IP or MAC.
force — Specifies the forced removal of the static host addresses.
sla-profile sla-profile-name — This optional parameter is used to specify an existing SLA profile
name to be associated with the static subscriber host. The SLA profile is configured in the
config>subscr-mgmt>sla-profile context.
create — This keyword is mandatory while configuring a static host.
ancp-string
Syntax ancp-string ancp-string
no ancp-string
Context config>service>vpls>sap>static-host
Description This command specifies the ANCP string associated to this SAP host.
Parameters ancp-string — Specifies the ANCP string up to 63 characters in length.
app-profile
Syntax app-profile app-profile-name
no app-profile
Context config>service>vpls>sap>static-host
Description This command specifies an application profile name.
Parameters app-profile-name — Specifies the application profile name up to 32 characters in length.
inter-dest-id
Syntax inter-dest-id intermediate-destination-id
no inter-dest-id
Context config>service>vpls>sap>static-host
Description Specifies to which intermediate destination (for example a DSLAM) this host belongs.
Parameters intermediate-destination-id — Specifies the intermediate destination ID.
To Next Page
Loading...
